TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 183 of 1012
TM 9-2350-261-20-2 REPLACE FUEL FILTER MOUNTING BRACKET (M577A2 AND M1068 WITH 200 AMP GENERATOR ONLY) — Continued 0233 00 3. Install bracket (5) on engine. Secure with four new screws (4) and new lockwashers (6). TIGHTEN SCREWS TO 50-55 LB-FT (60-70 N·M) TORQUE. Use torque wrench. 4. Install clamp (7) with field switch wire (8) on bracket (5). Secure with screw (9) and new locknut (10). FOLLOW-THROUGH STEPS 1. Install generator and mounting bracket (WP 0227 00). 2. Install secondary fuel filter (WP 0173 00). 3. Install primary fuel filter (WP 0172 00). 4. Install fan drive belts (WP 0211 00). 5. Install power plant rear access panel (WP 0433 00). 6. Connect battery ground lead (WP 0294 00). 7. Raise and lock ramp (see your -10). 8. Stop/shutdown engine (see your -10). END OF TASK 0233 00-3/4 blank