TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 182 of 1012
TM 9-2350-261-20-2 REPLACE FUEL FILTER MOUNTING BRACKET (M577A2 AND M1068 WITH 200 AMP GENERATOR ONLY) — Continued 0233 00 2. Remove four screws (6), lockwashers (7), and bracket (5) from engine. Discard lockwashers. INSTALLATION NOTE Generator (1), with bracket (2) and turnbuckle assembly (3) attached, must be placed on right side sponson prior to installing new fuel filter mounting bracket due to space restrictions. 1. Place generator (1), bracket (2), and turnbuckle assembly (3) on right side sponson inside power plant compartment. WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 2. Apply thin coat of sealing compound to threads of four new screws (4). 0233 00-2