TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 179 of 1012
TM 9-2350-261-20-2 REPLACE GENERATOR FIELD SWITCH 0232 00 THIS WORK PACKAGE COVERS: Removal (page 0232 00-1). Repair or Replacement (page 0232 00-1). Installation (page 0232 00-2). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) M a t e r i a l s / P a r t s Sealing compound (WP 0782 00, Item 60) P e r s o n n e l R e q u i r e d Unit Mechanic E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Carrier blocked (see your -10) Rear power plant access panel removed (see your -10) REMOVAL 1. Disconnect circuit 1A/1B lead (1) from generator field switch (2). NOTE Earlier switches may have a threaded pipe plug without a head or no plug at all. Discard the pipe plug with the switch. Do not reuse pipe plug because it can be installed too deeply and short out the new switch. 2. Remove switch (2) from tee (3) on secondary fuel filter (4). REPAIR OR REPLACEMENT 1. Check circuit lead. Replace worn or cracked lead and damaged connector (WP 0312 00, WP 0313 00, or WP 0314 00). 0232 00-1