Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 158 of 1012

TM 9-2350-261-20-2 REPLACE GENERATOR AND ADJUSTMENT LINKAGE (100 AMP GENERATOR ONLY) — Continued 0227 00 INSTALLATION NOTE If installing new generator, begin with Step 1, but remove nut and washer from generator shaft before installing pulley. Nut and washer are not used. If not installing new generator go to Step 3. 1. Install key (15) in generator shaft (14). 2. Install bushing (13) and pulley (12) on generator shaft (14) with three washers (11) and screws (10). TORQUE SCREWS TO 73-79 LB-IN (8-9 N·M). 3. Place bracket (6) on engine. Secure with two straps (9), four screws (8), and new locknuts (7). Do not tighten. 4. Install generator (1) on bracket (6). Secure with screw (5), screw (4), two washers (3), and new locknuts (2). 0227 00-4