TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 137 of 1012
TM 9-2350-261-20-2 REPLACE MASTER SWITCH PANEL ASSEMBLY (EARLY SLAVE RECEPTACLE) (ALL EXCEPT M577A2) — Continued 0223 00 INSTALLATION 1. Install two new grommets (17) in master switch panel assembly (16). 2. Install circuit 49 lead (8) and circuit 6 lead (4) through two grommets (17) into master switch panel (16). NOTE For all carriers with 200 amp generator, do Step 3. 3. Install circuit 2A lead (14) on master switch terminal (15). Secure with new lockwasher (13) and nut (12). 4. Install circuit 6 lead (8), circuit 2 lead (9), and circuit 400 lead (10) on bus bar (11). Secure with screw (7) and new locknut (6). 5. Install circuit 49 lead (4) on auxiliary power receptacle lead (5). Secure with screw (2), nut (1), and two new lockwashers (3). NOTE Check gasket on master switch panel flange for cracks or other damage. Replace gasket if damaged. 6. Install master switch panel (1) on distribution box (2). Secure with eight screws (3), washers (4), and new locknuts (5). 0223 00-3