TM-9-2350-261-20-2 Unit Maintenance Manual Volume 2 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 115 of 1012

TM 9-2350-261-20-2 REPLACE AUXILIARY POWER (SLAVE) RECEPTACLE (M577A2 AND M1068 ONLY) — Continued 0219 00 9. Place circuit 6 lead (1) in solder well of receptacle (2) and solder lead. Use soldering torch. 10. Place receptacle (2) on hull. Secure with four washers (3), new lockwashers (4), and screws (5). 11. Place circuit 50 lead (6) and clamp (7) on hull weldnut. Secure with washer (8) and screw (9). 12. Install guard (10) on hull. Secure with seven screws (11), new lockwashers (12), and washers (13). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Check receptacle for electrical continuity. Use multimeter. END OF TASK 0219 00-5/6 blank