TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 958 of 1236
TM 9-2350-261-20-1 REPLACE FUEL SUPPLY HOSES, TUBES, AND FITTINGS (M1064 ONLY) — Continued 0151 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin, even coat of sealing compound to cleaned external threads of fittings before installation. 2. Install adapter (1) on right fuel tank (2). 3. Install elbow (3) on adapter (1). 4. Install adapter (4) on elbow (3). 5. Install valve (5) on adapter (4) with arrow pointing away from fuel tank. 6. Install adapter (6) on valve (5). 7. Connect fuel supply hose (7) to adapter (6). 8. Install four clamps (8) and straps (9) as required on fuel hoses, wiring harness, and bilge pump tube. 0151 00-6