TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 950 of 1236
TM 9-2350-261-20-1 CLEAN FUEL CAP VENT AND FILTER SCREEN (M981 AND M1064 ONLY) — Continued 0150 00 NOTE Carrier may have optional cap with pressure relief valve. If fuel cap has pressure relief valve, remove cap by lifting pressure relief valve and turning cap counterclockwise. 1. Open fuel filler combat cover (1), and remove fuel cap (2) from filler neck (3). 2. Open hook (4) and remove attached chain (5) with fuel cap (2) from spring plate (6). 3. While holding end of spring plate (6) out of groove, rotate spring plate and remove from filler neck (3). NOTE Do not remove internal filter screen from screen cap. 4. Clean vent grommet (7) and screen cap (8) in fuel cap (2) as follows: a. Using pliers, pull on the tang in the center of screen cap (8), and remove screen cap from fuel cap (2). b. Check vent grommet (7) to make sure it is clean, free from damage, and secure. c. If vent grommet (7) is damaged, replace entire fuel cap (WP 0144 00). d. If grommet (7) is clogged or dirty, remove and clean with dry cleaning solvent and clean rag. e. Install grommet (7) in fuel cap (2). Make sure it is properly seated. 0150 00-2