TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 911 of 1236
TM 9-2350-261-20-1 REPLACE FUEL QUANTITY TRANSMITTER (M981 AND M1064 ONLY) — Continued 0146 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin coat of sealing compound to cleaned external threads of connector (1) before installation. 2. Secure transmitter (2) to bracket (3) with five screws (4) and nuts (5). 3. Install bracket (3) and transmitter (2) on fuel tank (6). Secure with two screws (7), new lockwashers (8), and washers (9). 4. Install lead (10) and connector (1) in tank (6). 5. Connect lead (10) to transmitter (2). Circuit 30A is left tank transmitter. Circuit 31A is right tank transmitter. 6. Secure lead (10) to tank (6) with clamp (11), washer (12), and screw (13). 7. Install bushing (14) and nut (15) on connector (1). 8. Install shell (16), washer (17), and contact (18) on lead (10). 0146 00-3