TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 879 of 1236
TM 9-2350-261-20-1 REPLACE FUEL TANK (M113A2, M901A1, AND M1059 ONLY) — Continued 0139 00 CLEANING, INSPECTION, AND REPAIR 1. Clean hull, retainer, shield, and pad surface thoroughly so that metal and rubber surfaces are clean and dry. 2. Check fittings. Repair or replace parts that have stripped threads. 3. Check pads on bottom of tank retainer and on hull, and rubber strips on both sides of shield. Replace missing, cut, broken, or cracked pads and rubber strips (WP 0523 00). 4. Check decals. Replace decals that cannot be read (WP 0511 00). ASSEMBLY WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin, even coat of sealing compound to cleaned external threads of fittings before installation. 2. Install adapter (1) in fuel tank (2). 3. Install tube (3) through adapter (1) and guide tube into tank baffle from fuel filler opening. 4. Install adapter (4) on adapter (1). 0139 00-7