TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 865 of 1236
TM 9-2350-261-20-1 INITIAL SETUP: M a i n t e n a n c e L e v e l Unit T o o l s a n d S p e c i a l T o o l s General Mechanic’s Tool Kit (WP 0780 00, Item 29) Hose assembly (WP 0780 00, Item 36) M a t e r i a l s / P a r t s Wiping rag (WP 0782 00, Item 76) Suitable size containers at least 95 gal (360 liter) P e r s o n n e l R e q u i r e d Unit Mechanic R e f e r e n c e s See your -10 E q u i p m e n t C o n d i t i o n Engine stopped (see your -10) Ramp lowered (see your -10) Carrier blocked (see your -10) Battery ground strap disconnected (WP 0294 00) WARNING Fuel flowing over a metal surface causes static electricity. This will cause a spark unless the surface is grounded. NOTE Use wiping rag to wipe up any spilled fuel. 1. Place a metal container (1) of suitable capacity directly behind carrier to left of lowered ramp. 2. Place container (1) against side of lowered ramp and rear of carrier to get metal-to-metal contact. Make sure there is a good ground. 3. Open fuel filler combat cover (2) and remove fuel filler cap (see your -10). 0135 00-1 DRAIN THIS WORK PACKAGE COVERS: Drain (page 0135 00-1). DRAIN FUEL TANK (M113A2, M901A1, AND M1059 ONLY) 0135 00