TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 855 of 1236
TM 9-2350-261-20-1 REMOVE/INSTALL POWER PLANT — Continued 0131 00 FOLLOW-THROUGH STEPS 1. Install air control valve and housing assembly (WP 0187 00). 2. Open fuel supply valve at tank (see your -10). 3. Connect battery ground strap (WP 0294 00). 4. Lower power plant grill (WP 0130 00). 5. Fill cooling system (WP 0194 00). 6. Adjust fuel control cutoff cable (WP 0403 00). 7. Check installation and operation of controls. 8. Start engine (see your -10). Check for leaks and proper installation. 9. Stop/shutdown engine (see your -10). 10. Install power plant bottom access cover (WP 0434 00). 11. Install power plant rear access panel (WP 0431 00, WP 0432 00, or WP 0433 00). 12. Install driver’s power plant access panel (WP 0430 00). END OF TASK 0131 00-21/22 blank