TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 848 of 1236
TM 9-2350-261-20-1 REMOVE/INSTALL POWER PLANT — Continued 0131 00 9. Lower power plant and remove lifting sling. 10. Install two washers (13) and new lockbolts (14) in front engine mount base. TIGHTEN LOCKBOLTS TO 120-130 LB-FT (162-176 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 103). 11. Install cap (15) with two new key washers (16) and screws (17). TIGHTEN SCREWS TO 30-35 LB-FT (41-48 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 103). 12. Install washer (9) and nut (8) on transfer gearcase left mount. 13. TIGHTEN NUT (8) TO 75-80 LB-FT (102-108 N·M) TORQUE. Use torque wrench (WP 0780 00, Item 103). 0131 00-14