TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 812 of 1236
TM 9-2350-261-20-1 REPLACE OIL GAUGE ROD AND GUIDE — Continued 0129 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin coat of sealing compound to external threads of adapter (8). 2. Install adapter (8) in engine block. 3. Install gauge rod guide (2) in adapter (8). 4. Install gauge rod guide (2) on bracket (7). Secure with clamp (6), screw (4), washer (5), and new locknut (3). 5. Install gauge rod (1) in gauge rod guide (2). FOLLOW-THROUGH STEPS 1. Install driver’s power plant access panel (WP 0430 00). 2. Install power plant rear access panel (WP 0431 00, WP 0432 00, or WP 0433 00). 3. Install power plant bottom access cover (WP 0434 00). END OF TASK 0129 00-2