TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 802 of 1236
TM 9-2350-261-20-1 REPLACE AIR BOX DRAIN HOSES, TUBES, AND FITTINGS — Continued 0126 00 INSTALLATION NOTE If elbows (3) and (4) need to be replaced, notify direct support maintenance. 1. Connect two tube assemblies (1) and (2) to two elbows (3) and (4). 2. Install two hose clamps (5) and (6) on two drain hoses (7) and (8). 3. Connect two drain hoses (7) and (8) to two tube assemblies (1) and (2). 4. Tighten two hose clamps (5) and (6) on two drain hoses (7) and (8). 5. Install two drain hoses (7) and (8) on container bracket (9). 6. Install two drain hoses (7) and (8) in engine block. Secure with three screws (10), two washers (11), and three clamps (12). TIGHTEN SCREWS TO 180-216 LB-IN (20-25 N·M) TORQUE. Use torque wrench and socket set. FOLLOW-THROUGH STEPS 1. Install starter (WP 0236 00). 2. Install power plant (WP 0131 00). END OF TASK 0126 00-2