TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 799 of 1236
TM 9-2350-261-20-1 REPLACE ENGINE OIL FILTER BRACKET, HOSES, AND FITTINGS — Continued 0125 00 INSTALLATION 1. Apply a thin coat of antiseize compound to clean threads of four screws (1). 2. Place bracket (2) and oil filler tube bracket (3) on transmission. Secure with four screws (1) and new tab washers (4). WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 3. Apply a thin coat of sealing compound to cleaned external threads of two elbows (5) and (6). 4. Install two elbows (5) and (6) in engine block. 5. Connect engine oil hose (7) to elbow (5) and engine oil hose (8) to elbow (6). Use adjustable and open end wrenches. 6. Install clamp (9) on engine oil hose (7). Secure clamp to bracket (2) with screw (10), washer (11), and nut (12). 0125 00-3