TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 795 of 1236
TM 9-2350-261-20-1 REPLACE ENGINE OIL FILTER ASSEMBLY — Continued 0124 00 4. Install two elbows (1) and (2) in filter assembly (3). 5. Install elbow (4) in elbow (1). 6. Connect oil hose (5) to elbow (2). 7. Connect oil hose (6) to elbow (4). 8. Install drain plug (7) in filter assembly (3). WARNING Carbon monoxide is poisonous and can kill you. Do not idle engine with driver’s power plant access panel off unless there is VERY GOOD AIR FLOW. 9. Start engine (see your -10). Check filter assembly for leaks. 10. Stop engine (see your -10). Wait about 20 minutes for oil to drain back to pan, then check oil level. Add oil if needed (WP 0120 00). FOLLOW-THROUGH STEPS 1. Install power plant bottom access cover (WP 0430 00). 2. Raise and lock ramp (see your -10). 3. Stop/shutdown engine (see your -10). END OF TASK 0124 00-3/4 blank