Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 789 of 1236

TM 9-2350-261-20-1 REPLACE ENGINE OIL FILTER ELEMENT AND PARTS — Continued 0123 00 INSTALLATION NOTE If only filter element is being replaced, do Step 1, Steps 4 - 7, and Steps 12 - 13. 1. Apply a thin coat of engine oil on new gasket (1). Install gasket in filter head (2). 2. Install new gasket (3) on housing (4). Install bolt (5) in housing. 3. Install washer (6), spring (7), new preformed packing (8), and retainer (9) on bolt (5). Secure with nut (10). 4. Place new filter element (11) very carefully over bolt (5) in housing (4). 5. Install housing (4) with new element (11) on head (2). 6. Install drain plug (12) in housing (4). 7. TIGHTEN BOLT (5) TO 50-60 LB-FT (68–81 N·M) TORQUE. Use torque wrench. 0123 00-3