TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 786 of 1236
TM 9-2350-261-20-1 REPLACE FRONT ENGINE MOUNT — Continued 0122 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin coat of antiseize compound and sealing compound to cleaned threads of two screws (1) and self-locking bolts (6). 2. Install base (4) on engine (5) with two self-locking bolts (6) and washers (7). 3. Install power plant (WP 0131 00). 4. Install cap (3) on base (4) with two new key washers (2) and screws (1). 5. TIGHTEN TWO SCREWS (1) TO 30-35 FT-LB (41-48 N·M) TORQUE. TIGHTEN TWO SELF-LOCKING BOLTS (6) TO 90-100 FT-LB (122-135 N·M) TORQUE. Use torque wrench. END OF TASK 0122 00-2