TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 656 of 1236
TM 9-2350-261-20-1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING LUBRICATION INSTRUCTIONS — Continued 0120 00 ITEM NO. INTERVAL MAN- HOUR ITEM TO BE CHECKED OR SERVICED CREWMEMBER PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: NOTE Visual inspection of engine/transmission should not be justification to change oil. Detergent oils may appear dark in color due to additives. Change oil and filters when converting from OE/HDO to OEA, PE30–1 and from OE/HDO, PE10–1 to OE/HDO. See engine and transmission temperature key charts (Table 13, page 0120 00-18 and Table 14, page 0120 00-18). d. Clean inside of engine filter cover or transmission filter cavity with cleaning compound (WP 0782 00, Item 16). e. Install new engine filter element/gasket, or transmission element/packings (WP 0123 00 or WP 0341 00). C A U T I O N Engine and transmission can be damaged if filled above the (F) mark on the gauge rod. f. Refill engine and check oil level with approximately 18 quarts of OE/HDO or OEA. Bring level between full and low marks on gauge rod. Start and run engine and check for oil leaks. g. Refill transmission with appproximately 16 quarts of OE/HDO or OEA after oil change. Start and run engine and operate transmission through all gear selector positions. Any Class III leaks. h. Engine and transmission operational check: run engine and check for oil leaks at filter and drain plug. Inspect access covers on hull bottom and replace gaasket or cover if required. Any Class III leaks. 0120 00-28