TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 593 of 1236
TM 9-2350-261-20-1 STE/ICE-R ENGINE WILL CRANK BUT WILL NOT START TROUBLESHOOTING — Continued 0105 00 3Y 1. Remove red stripe pressure transducer from secondary fuel filter. 2. Check operation of engine shutoff cable (WP 0403 00). 3. Check restriction in air intake (WP 0403 00). 4. Check cold weather operation (see your -10). 5. If engine still does not start, notify direct support maintenance. 6. Verify no faults found. BY C A U T I O N Pull fuel shutoff all the way out. Transducer will be damaged if engine starts. 1. Remove red stripe pressure transducer from secondary fuel filter. 2. Connect fuel supply hose to secondary fuel filter. 3. Remove inlet plug (1) from secondary fuel filter (2) and install red stripe pressure transducer (3) in inlet hole (4) of filter. 4. Pull fuel shutoff all the way out. 5. Crank engine and read display. 6. Is fuel pressure greater than 4 psi (28 kPa)? BYN 1. Remove red stripe pressure transducer from secondary fuel filter. 2. Check engine fuel pump (WP 0171 00). 3. Check generator field switch (WP 0232 00). 4. In freezing temperatures, check fuel lines for ice blockage or coagulation of fuel. 5. Start engine (see your -10). 6. If engine still does not start, repair blockage in fuel line. 7. Verify no faults found. B2Y 1. Remove red striped pressure transducer and install plug in secondary fuel filter. 2. Replace fuel filter element (WP 0174 00). 3. Start engine (see your -10). 4. If engine still does not start, check fuel system. 5. Verify no faults found. 0105 00-3/4 blank