TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 551 of 1236
TM 9-2350-261-20-1 STE/ICE–R PROCED URE S (SIMPLIFIED TEST EQU IPMEN T FOR INTERNAL COMB USTION EN GINES REP ROGR AMMABLE) — Continued 0099 00 d. Cable Connectors. The four cable connectors on the VTM are: DCA/PWR J1, transducer cable connectors J2 TK and J3 TK, and VOLTS/OHMS J4. •DCA/PWR connector J1 – used to connect VTM to either a vehicle diagnostic connector with the DCA cable W1 or to a DC power source with the power cable W5. The DC power source is usually the vehicle’s batteries. •Transducer cable connectors J2 TK and J3 TK – used to connect transducer cables W4 to VTM. Power and signals are routed through these connectors. Both connectors may be used when a test requires two measurements to be made at the same time. •VOLTS/OHMS connector J4 – used to connect test probe cable W2 to VTM for voltage and resistance tests. 0099 00-3