Sign up to sell your inventory with NSN Lookup

TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 514 of 1236

TM 9-2350-261-20-1 NO AC POWER FROM INVERTERS (M1068 ONLY) — Continued 0089 00 4Y 1. Turn MASTER SWITCH to OFF (see your -10). 2. Remove solo plug (1) from tested inverter IN1 (2) and install in inverter IN2 (3). 3. Turn MASTER SWITCH to ON (see your -10). 4. On inverter front panel (4), set POWER SWITCH (5) to ON and momentarily move RESET SWITCH (6) up. 5. Measure voltage between sockets C and D of cable W5 plug P6 (7). 6. Does multimeter read 110 volts AC or more? 4YN 1. Faulty inverter IN2 (with solo plug installed). 2. Notify your supervisor. 5Y 1. Install cable W5 plug P6 on power control enclosure jack J27. 2. Replace cascade remote harness W15 (WP 0745 00). 3. Verify no faults found. 0089 00-6