TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 320 of 1236
TM 9-2350-261-20-1 TRANSMISSION OIL HI TEMP INDICATOR MALFUNCTIONS — Continued 0052 00 DY 1. Turn MASTER SWITCH to OFF (see your -10). 2. Remove front main harness circuit 327/27G plug (1) from TRANS OIL HI TEMP assembly jack (2). 3. Measure resistance between front main harness circuit 327/27G plug (1) circuit 327 pin and ground. 4. Does multimeter read more than 0 ohms? DYN 1. Remove jumper cable and install circuit plug on trans hi oil temp switch. 2. Replace TRANS OIL HI TEMP indicator assembly (WP 0251 00). 3. Verify no faults found. D2Y 1. Install TRANS OIL HI TEMP indicator cover lens, gasket, bulb, and gasket. 2. Remove engine harness plug (1) from front main harness jack (2) at carrier bulkhead. 3. Measure resistance between engine harness plug (1) pin G (3) and ground. 4. Does multimeter read more than 0 ohms? D2YN 1. Remove jumper wire and install engine harness circuit 327 plug on trans oil hi temp switch. 2. Repair front main harness circuit 327 (WP 0312 00). 3. Verify no faults found. 0052 00-6