TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 318 of 1236
TM 9-2350-261-20-1 TRANSMISSION OIL HI TEMP INDICATOR MALFUNCTIONS — Continued 0052 00 CY 1. Remove TRANS OIL HI TEMP indicator cover lens, gasket, bulb, and gasket. 2. Measure voltage between indicator assembly center contact and ground. 3. Does multimeter read less than 17 volts? CYN GO TO DY (PAGE 0052 00-6) C2Y 1. Remove jumper wire and install engine harness circuit 327 plug on trans oil hi temp switch. 2. Remove front main harness circuit 327/27G plug (1) from TRANS OIL HI TEMP indicator assembly jack (2). 3. Measure voltage between front main harness circuit 327/27G plug (1) circuit 27G pin and ground. 4. Does multimeter read less than 17 volts? C2YN 1. Replace TRANS OIL HI TEMP indicator assembly (WP 0251 00). 2. Verify no faults found. 0052 00-4