TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 171 of 1236
TM 9-2350-261-20-1 CHARGING SYSTEM MALFUNCTIONS — Continued 0018 00 5Y 1. Measure resistance between engine harness plug C8 (1) and plug C3 (2), sockets D (3) to pins B (4), C (5) to C (6), B (7) to D (8), and E (9) to E (10). 2. Does multimeter read 0 ohms each time? 5YN 1. Repair/replace engine harness (WP 0312 00). 2. Verify no faults found. 6Y 1. Install engine harness plug C8 on generator jack. 2. Remove engine wiring harness plug C3 (1) from bulkhead jack (2) and plug C4 (3) from regulator jack C4 (4). 3. Inspect engine harness plug C3 (1), bulkhead jack (2), front main plug C4 (3), and regulator jack C4 (4) for corrosion and damage. 4. Are plugs and jacks in clean and good condition? 6YN 1. Repair/replace front main wiring harness and/or regulator (WP 0312 00 and WP 0230 00). 2. Verify no faults found. 0018 00-3