TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 129 of 1236
TM 9-2350-261-20-1 ENGINE DOES NOT CRANK — Continued 0009 00 A3Y 1. Turn MASTER SWITCH to OFF (see your -10). 2. Remove engine harness circuit 6 plug (1) from front main harness circuit 6 jack (2) at carrier bulkhead. 3. Inspect plug and jack for corrosion and/or other damage. 4. Are parts in good condition? A3YN 1. Repair engine wiring harness or front main wiring harness circuit 6 (WP 0312 00). 2. Verify no faults found. A4Y 1. Remove eight nuts (1), washers (2), and screws (3) from master switch panel (4). Pull panel away from distribution box (5). 2. Inspect cable 49 (6) from master switch to distribution box. 3. Are cable and cable ends free from corrosion and damage? A4YN 1. Repair master power to distribution box cable (WP 0314 00). 2. Install master switch panel on distribution box. 3. Verify no faults found. 0009 00-7