TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 1124 of 1236
TM 9-2350-261-20-1 REPAIR AIR CONTROL VALVE CABLE — Continued 0188 00 INSTALLATION 1. Install cable (4) through opening in driver’s compartment bulkhead below throttle and fuel cutoff controls. 2. Secure cable (4) to bulkhead with nut (11). 3. Secure two clamps (9) to cable (4) with two screws (6), washer (7), new locknut (8), and weldnut (10). 4. Install clamp (2) on cable (4). 5. Secure clamp (2) to weldnut (5) with screw (1) and washer (3). FOLLOW-THROUGH STEPS 1. Install air control valve (WP 0187 00). 2. Close power plant front access door (see your -10). 3. Raise trim vane (see your -10). END OF TASK 0188 00-2