TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 1120 of 1236
TM 9-2350-261-20-1 REPAIR AIR CONTROL VALVE — Continued 0187 00 INSTALLATION 1. Install three cables (4) on bracket (5) on housing (6). Secure with clamp (3), screw (2), and new locknut (1). 2. Secure pin (7) to baffle (8) with new cotter pin (9) and washer (10). 3. Secure hinge (11) to baffle (8) with two screws (12), washers (13), and new locknuts (14). 4. Install baffle (8) and hinge (11) in housing (6). Secure with two screws (15), washers (16), and nuts (17). 5. With cable (18) in full forward position and baffle (8) in down position, support housing (6) and secure cable (18) to pin (7) with two collars (19) and setscrews (20). 6. Secure cable (18) and two clamps (21) to weldnut (22) with washer (23), two screws (25), and new locknut (24). 7. Secure housing (6), new gasket (26), and screen (27) to driver’s compartment bulkhead with three screws (28) and washers (29). 8. Secure plate (30), housing (6), and new gasket (26) to driver’s compartment bulkhead with five screws (31), washers (32), and two spacers (33). 0187 00-4