TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 1102 of 1236
TM 9-2350-261-20-1 SERVICE AIR CLEANER FILTER ELEMENT — Continued 0182 00 2. Wash element in solution of non-sudsing or low sudsing detergent and water or soap and water. Do not use gasoline or solvents for cleaning. a. Prepare solution of 1 cup of dry detergent to 5 gallons of water in a container large enough to completely submerge the element. The temperature of the solution should not exceed 190 F (88 C). Make solution stronger if element is extremely dirty. b. Immerse element completely in washing solution. Agitate element gently for 2 minutes. c. Allow element to soak in solution for a minimum of 15 minutes. Agitate element gently for an additional 3 to 5 minutes. d. Remove element from solution and allow to drain. e. Rinse element with cold water from a hose with a maximum 30 psi (207 kPa) water pressure from inside to outside of element. Continue rinsing until water runs clear and detergent or soap residue is removed from element. f. Allow element to air dry thoroughly. FOLLOW-THROUGH STEPS 1. Install air cleaner element (see your -10). END OF TASK 0182 00-2