TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 110 of 1236
TM 9-2350-261-20-1 INTRODUCTION HOW TO USE TROUBLESHOOTING — Continued 0005 00 The YES arrow takes you to this block. Do Steps 1–3. In this sample, let us say the terminal end is free from corrosion and/or other damage. So the answer to Step 3 is YES. Follow the YES arrow to the next block. The YES arrow takes you to this block. You have found the fault in the MASTER SWITCH. This block gives you the step to correct the fault. Do Step 1. It tells you to go to another task in the manual. Go the the page shown and perform the task. Return to this block when you have completed the task. Step 2 in this block is “Verify no faults found.” Check to make sure you have fixed the reported fault and there are no other problems. After no faults have been verified, return carrier to operation. This section has given you information on how to use troubleshooting. By going through the troubleshooting sample, you have seen how parts of this chapter are used. This information will help you successfully troubleshoot at the unit maintenance level. 0005 00-8