TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 1068 of 1236
TM 9-2350-261-20-1 REPLACE PRIMARY FUEL FILTER ASSEMBLY — Continued 0172 00 2. Install two elbows (4) and (6) in filter assembly (10). 3. Secure filter assembly (10) to bracket (9) with two screws (7) and nuts (8). 4. Connect two fuel supply hoses (5) and (12) to two elbows (4) and (6). 5. Close drain valve (11) and fill filter assembly (10) with fuel. 6. Install bleed plug (3) in filter assembly (10). 7. Connect supply hose at quick disconnect coupling (1). NOTE Step 8 is for M1068 only, if fuel shutoff valve is installed. 8. Turn fuel shutoff valve (2) to open position (M1068 Only). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Start engine (see your -10). 3. Check for leaks. Install power plant rear access panel (WP 0431 00, WP 0432 00, or WP 0433 00). 4. Raise and lock ramp (see your -10). 5. Stop/shutdown engine (see your -10). END OF TASK 0172 00-4