TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 1064 of 1236
TM 9-2350-261-20-1 REPLACE ENGINE FUEL PUMP — Continued 0171 00 2. Install two elbows (1) and (2) in fuel pump (3). 3. Place fork (4) on pump drive shaft (5). Place new gasket (6) and fuel pump (3) on engine. 4. Secure fuel pump (3) to engine with three screws (7). 5. Connect primary fuel filter supply hose (8) to elbow (2). 6. Connect secondary fuel filter supply hose (9) to elbow (1). 7. Connect supply hose at quick disconnect coupling (10). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Start engine (see your -10). Check for leaks. 3. Raise and lock ramp (see your -10). 4. Stop/shutdown engine (see your -10). 5. Install power plant rear access panels and support (WP 0431 00, WP 0432 00, or WP 0433 00). END OF TASK 0171 00-4