TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 105 of 1236
TM 9-2350-261-20-1 INTRODUCTION HOW TO USE TROUBLESHOOTING — Continued 0005 00 STE-ICE Test Procedure A STE/ICE test procedure will tell you how to use the STE/ICE test equipment. You may be directed to go to a STE/ICE test procedure when performing the troubleshooting procedures. The parts of a STE/ICE test procedure are given below. Legend to Sample Above 1. TITLE Test number and procedure name. 2. INITIAL SETUP This tells you the tools, materials/parts, personnel, references, and equipment conditions needed to do the procedure. 3. STE/ICE HOOK UP Steps that tell you how to perform the HOOK UP/REMOVE STE/ICE test. 4. TASK STEPS Steps that tell you how to set up and perform the test. Before you begin, make sure you have all items in the INITIAL SETUP. Do all steps in the test procedure and then return to where you left off in troubleshooting task. Continue to follow troubleshooting task instructions to find and correct the fault. Locating the Correct Troubleshooting Procedure (1) Carrier arrives at shop. (2) Read DA Form 2404. (3) Verify that the problem on DA Form 2404 exists. (4) Look up the carrier symptom in the Malfunction/Symptom Index (WP 0006 00) and go to that task. 0005 00-3