TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 1027 of 1236
TM 9-2350-261-20-1 REPLACE BULKHEAD CONNECTION TO PRIMARY FUEL FILTER HOSE — Continued 0163 00 INSTALLATION WARNING Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you dizzy and irritate your eyes and throat. Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes. Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves. 1. Apply a thin, even coat of sealing compound to cleaned external threads of hose ends and fittings. 2. Install elbow (4) in primary fuel filter (5). 3. Install adapter (3) in quick disconnect coupling (1). 4. Connect fuel supply hose (2) to elbow (4) and adapter (3). 5. Connect quick disconnect coupling (1). FOLLOW-THROUGH STEPS 1. Connect battery ground lead (WP 0294 00). 2. Start engine (see your -10). Check for leaks. 3. Raise and lock ramp (see your -10). 4. Stop/shutdown engine (see your -10). 5. Install power plant rear access panel (WP 0431 00, WP 0432 00, or WP 0433 00). END OF TASK 0163 00-3/4 blank