TM-9-2350-261-20-1 Unit Maintenance Manual Volume 1 M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 1016 of 1236
TM 9-2350-261-20-1 REPLACE FUEL VENT HOSES, TUBES, AND FITTINGS (M577A2 AND M1068 ONLY) — Continued 0160 00 5. Install two elbows (1) and (2) in left fuel tank (3). 6. Install nipple (4) in elbow (2). 7. Install elbow (5) on nipple (4). 8. Connect vent tube (6) to two elbows (7) and (8). 9. Install vent tube (6) on five weldnuts (9). Secure with five clamps (10), new lockwashers (11), and screws (12). 10. Connect vent hose (13) to elbow (1) at left fuel tank (3). 11. Connect vent hose (14) to elbow (5) at left fuel tank (3). 12. Connect two vent hoses (13) and (14) to two elbows (15) at filler neck (16). 13. Install two vent hoses (13) and (14) on seven weldnuts (17). Secure with seven clamps (18), new lockwashers (19), and screws (20). 14. Secure vent hose (14) to five weldnuts (21) with five clamps (22), new lockwashers (23), and screws (24). 15. Fill fuel tanks. Check for leaks (see your -10). FOLLOW-THROUGH STEPS 1. Install map board (see your -10). 2. Install work tables (WP 0502 00). 3. Connect battery ground lead (WP 0294 00). 4. Raise and lock ramp (see your -10). 5. Stop/shutdown engine (see your -10). END OF TASK 0160 00-6