TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 647 of 764
TM 9-2350-261-10 DRAIN FUEL FILTERS 0090 00 THIS WORK PACKAGE COVERS: Drain (page 0090 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Unit P e r s o n n e l R e q u i r e d Driver M a t e r i a l s / P a r t s Wiping rag (WP 0096 00, Item 10) Hose, 1/4 inch, 2 feet long Suitable container R e f e r e n c e s WP 0049 00 E q u i p m e n t C o n d i t i o n Engine stopped (WP 0029 00) DRAIN 1. Remove power plant rear access panels (WP 0049 00). 2. Place a 2-foot length of 1/4 inch or other suitable bulk hose past the drive belts and idlers, and slip one end of the hose over the drain valve. Run the other end of hose into a suitable container resting on the crew compartment floor in order to catch the drained fuel. Open drain valve and remove bleed plug to drain filter. C A U T I O N Open drain valves slowly so you do not spill fuel on the power plant. 3. Slowly open valve and let it run until all water is drained. When clean fuel starts to run from the fuel filter, close the valve. 0090 00-1