TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 631 of 764
TM 9-2350-261-10 SERVICE BILGE PUMPS — Continued 0086 00 10. Position bilge pump screen on weld nuts and secure with two flat washers, lockwashers, and screws. Use cross tip screwdriver. 11. Connect lead to bilge pump. 12. Install front access cover on hull and secure with four washers and screws. Use 1/2 inch drive socket wrench handle and 3/4 inch socket. 13. Close power plant access door (WP 0014 00). 14. Stow trim vane (WP 0047 00). REAR BILGE PUMP 1. Lower ramp (WP 0015 00). 0086 00-3