TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 630 of 764
TM 9-2350-261-10 SERVICE BILGE PUMPS — Continued 0086 00 4. Service front bilge pump. Use flashlight. 5. Disconnect lead from bilge pump. 6. Remove two screws, lockwashers, and flat washers securing bilge pump screen to weld nuts. Remove screen. Use cross tip screwdriver. 7. Remove mud and debris from bilge pump and screen. If bilge pump needs additional cleaning, notify unit maintenance. 8. Clean vent hole. Use a wire and run it back and forth in vent hole a few times. 9. Clean front bilge pump outlet line sight glass as needed. If sight glass must be removed to get it clean, notify unit maintenance. 0086 00-2