TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 625 of 764
TM 9-2350-261-10 CHECK CARRIER BATTERIES — Continued 0085 00 2. Check battery retainers and clamp with both hands and try to move them. If batteries move or seem loose, report it to unit maintenance. 3. Check battery connections. Try to twist clamp with thumb and first two fingers. Check to see if cables are securely connected to clamp. If clamp or connection is loose, report it to unit maintenance. NOTE Check the water level more frequently in hot weather. 4. Remove vent plugs from batteries and check battery electrolyte level. Use a flashlight. Look down into each battery cell. The electrolyte level should be covering the plates and to the lower edge of the vent. If battery cells are low or dry, add distilled water. Install vent plugs on battery cells. 5. Clean battery. Wipe off battery casing and surrounding metal parts. Use clean dry wiping rag. Check terminals, clamp, cables, and retainers for corrosion. If wiping rag will not remove dirt, notify unit maintenance. 6. Coat terminals with a small amount of grease (GAA). 0085 00-3