TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 619 of 764
TM 9-2350-261-10 ASSEMBLE T130 TRACK SHOE SECTIONS OFF VEHICLE 0084 00 THIS WORK PACKAGE COVERS: Assembly (page 0084 00-1). INITIAL SETUP: M a i n t e n a n c e L e v e l Operator T o o l s a n d S p e c i a l T o o l s C row bar ( WP 0 094 0 0, Table 2, Item 11) D rive Pin Pu nch (W P 00 94 00 , Tab le 2, Item 3 7) G rease Gun (WP 009 4 00, Table 2, Item 24) Hamm er, 2 lb (W P 0094 00, Table 2, Item 25) Industrial Goggles (WP 0 095 00) Open End Wrench, Adjustable (WP 0094 00, Table 2, Item 57) Socket Wrench, 11/16 inch (W P 0094 00, Table 2, Item 43) Track Fixtures (WP 0 094 00, Table 2, Item 21) Wr ench Handle (WP 0 094 00, Table 2, Item 28) P e r s o n n e l R e q u i r e d Driver Helper (H) E q u i p m e n t C o n d i t i o n Track on level surface ASSEMBLY NOTE Track shoe sections may come in 7 or 8 shoes per section. Make sure to count the number of shoes during assembly. For all M113A2 FOV there are 63 track shoes required for the left side and 64 track shoes required for the right side. Inspect each track shoe to see if anything is wrong before it is assembled. 1. Match two sections of track. Have helper assist. 2. Remove nut from track pin. Use 1/2 inch drive socket handle and 11/16 inch socket. 0084 00-1