TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 615 of 764
TM 9-2350-261-10 TRACK SHOE WEAR LIMITS — Continued 0082 00 10. End Connectors (T150 only). Visually look at the outside edge thickness of the end connectors. If any end connector appears to be worn where the sprocket teeth make contact more than the rest of the end connectors, the end connector mu st be removed to measure it with the track gauge (W P 0094 00, Table 2, I tem 2 3). The inside portio n is g enerally where it will wear out and can only be checked when it is removed from the track shoe. If you remove the end connector to measure it and reinstall it, make sure you have unit maintenance torque it properly before operating the carrier for any length of time or going on any missions. Measure the outside edge thickness of end connector. If the track gauge fits over the end connector edge, end connector is worn. Have unit maintenance replace end connector. END OF TASK 0082 00-5/6 blank