TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 610 of 764
REMOVE/INSTALL T150 TRACK SHOE — Continued INSTALLATION WARNING Loss of track end connector can cause track throw and loss of vehicle control. Soldiers can be killed or injured. Mark end connector bolts. Notify maintenance to torque bolts. NOTE Position track shoes at slight angle to install end connectors on both shoe pins. Proper tightening of end connector bolts keeps them from coming loose. Have unit maintenance properly torque as soon as possible. 1. Install new track shoe on track. a. Install two track pin alignment tools over track shoe pins. Install two track end connectors on track shoes. Remove track pin alignment tools before driving end connectors flush with pin ends. b. Drive end connectors flush with pin ends and install bolts on each end connector. c. Tighten bolts using extension wrench on handle with socket. 2. Mark track that was replaced so bolts can be torqued later. 4. Stow spare track shoe. 5. Notify unit maintenance to torque bolts. END OF TASK 3. Join track (WP 0079 00). 0081 00-2 0081 00 TM 9-2350-261-10