TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 601 of 764
TM 9-2350-261-10 BREAK/JOIN T150 TRACK — Continued 0079 00 7. Install inside end connector. Only a slight amount or no leverage is needed to install the second connector if the outside end connector is already installed. 8. Once the end connector is installed halfway on the inside of the track assembly, remove the track fixture and track alignment tool. Finish installing the end connector all the way on the track shoe pins until it touches the track shoe body. WARNING Not getting the bolt tight enough may result in death to personnel and damage to equipment if the end connectors fall off during movement of the vehicle. Use the wrench extension over the breaker bar to achieve more leverage when tightening the end connector bolt. NOTE Move vehicle far enough to position end connectors that need to be tightened on top. 0079 00-9