TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 596 of 764
TM 9-2350-261-10 BREAK/JOIN T150 TRACK — Continued 0079 00 WARNING Always wear eye protection when using a hammer. Eye injury may result if metal chips contact eyes. WARNING You could be injured if track swings out and hits you. Do not stand in front of track being broken. C A U T I O N Keep personnel clear when removing the end connectors to avoid being hit when they are knocked free from the track shoe pins. NOTE Remove outside end connector first, then inside end connector. 9. Install two track fixtures on both sides of the track and tighten to pull track shoes together. Use the track end connector tool and hammer to remove the end connector. Repeat using the track end connector tool to remove the opposite end connector. 0079 00-4