TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 590 of 764
TM 9-2350-261-10 BREAK/JOIN T130 TRACK — Continued 0078 00 WARNING Always wear eye protection when using a hammer. Eye injury may result if metal chips contact eyes. 4. Tighten each track fixture an equal amount to line up track pin holes. Tap long end of drive pin punch through track pin holes to other side of track. Use hammer. Tighten track fixture as needed to obtain 20 degree angle between shoes to be connected. Use 1-5/16 inch adjustable wrench. WARNING Track shoe bushing failure can cause track assembly failure and loss of vehicle control. Soldiers can be killed or injured. Do not use excessive force that could damage the track shoe bushing while driving in the track pin during assembly. 5. From inside of track, install track pin in track pin hole. As helper aligns track pin holes with crowbar, lightly tap in track pin. Drive track pin all the way through track. Use hammer. 0078 00-6