TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 523 of 764
TM 9-2350-261-10 PREVENTIVE MAINTENANCE CHECKS AND SERVICES — Continued 0075 00 ITEM NO. INTERVAL MAN- HOUR ITEM TO BE CHECKED OR SERVICED CREWMEMBER PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: C A U T I O N Do not use wire brush to clean launcher tubes. Brush may cause damage to tubes. c. Clean smoke grenade launcher tubes. 1) During continued firing, clean tubes with cleaning compound (WP 0096 00, Item 3). Do not wipe dry or lubricate. 2) Clean debris from barrel drain holes by inserting stiff wire, if necessary. 3) Be sure that no residue remains around tip plugs located at bottom center in each barrel. 4) Immediately after firing and for two consecutive days thereafter, thoroughly clean tubes with cleaning compound (WP 0096 00, Item 3). Make sure all surfaces are well coated. Do not wipe dry. 5) Three days after last firing, clean tubes with cleaning compound (WP 0096 00, Item 3). Wipe dry with clean cloth (WP 0096 00, Item 5). 0075 00-75