TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download

Page 45 of 764

TM 9-2350-261-10 HOW TO USE THIS MANUAL (cont) CAUTIONs call attention to actions or material that could damage equipment. C A U T I O N Improper cable removal can cause a short circuit. Remove negative cable before you remove positive cable. A sample CAUTION is shown above. NOTEs contain information that makes the step and Work Package easier to do. NOTE When quick release pin is removed, mirror control knob will spring back into locked position. A sample NOTE is shown above. HELPER Helpers are needed for Work Packages that require more than one person, such as lifting heavy objects or acting as an observer. If a helper is needed to perform a procedure, the INITIAL SETUP will list “Helper” under the PERSONNEL REQUIRED heading. If helper assists with a step, the step will include: “Have helper assist.” If a helper performs the action alone, the step will start with “(H).” Locational Terms The terms FRONT, REAR, LEFT, and RIGHT are used to indicate where items are located on the carrier. Think of these locations as if you were standing on the ramp facing the inside of the carrier. xi/xii blank