TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 379 of 764
TM 9-2350-261-10 TOW START DISABLED CARRIER — Continued 0065 00 C A U T I O N Don’t leave the range selector in any driving range for more than about 5 seconds under tow. If the engine doesn’t start, shift back to N range and let the transmission rest for a few seconds. 7. When engine starts, shift the range selector to N range. Pull back a little on both steering levers to slightly brake the towed carrier. Signal the towing driver to stop. If you don’t get a start in three tries, stop and troubleshoot the engine, (WP 0072 00). 8. After disabled carrier starts, slowly bring both vehicles to a stop. 9. Shift range selector in disabled carrier to N range. 10. Lock steering levers in disabled carrier. Pull back on both levers and press the lock buttons down. REMOVE TOW BAR FROM DISABLED CARRIER AND RECOVERY VEHICLE 1. Stop engine on recovery vehicle. 2. Remove cotter pin from tow pintle on recovery vehicle. 3. Pull up on pintle hook latch and open pintle. 4. Remove tow bar from tow pintle. Close tow pintle and check that tow pintle latch is closed. 0065 00-5