TM-9-2350-261-10 Operator Manual M113A2 M577A2 M1064 M1068 M1059 M901A1 Download
Page 374 of 764
TM 9-2350-261-10 TOWING DISABLED CARRIER WITH A RECOVERY VEHICLE — Continued 0064 00 REMOVE TOW BAR FROM DISABLED CARRIER AND RECOVERY VEHICLE 1. Stop engine on recovery vehicle. 2. Remove cotter pin from tow pintle on recovery vehicle. 3. Pull up on pintle hook latch and open pintle. 4. Remove tow bar from tow pintle. Close tow pintle and check that tow pintle latches closed. 5. Install cotter pin to secure pintle hook latch closed. 6. Remove two retainer clips and pins securing tow bar to towing eyes of disabled carrier. Remove tow bar. 7. Install two pins in tow bar and secure with retainer clips. REMOVE TOW CABLES 1. Drive recovery vehicle backward until tow cables are slack. 2. Stop engine on recovery vehicle. 3. Remove two tow cables from tow hooks on front of disabled carrier and from tow hooks on rear of recovery vehicle. END OF TASK 0064 00-6